Choose appropriate oneself in front of the mirror

Diving mask whether appropriate oneself very critical problem. Regardless of the price of this pair of diving mask the more expensive, looks cool, if it will leak, it is not cool or not worth the money you spend for it. Because each person's face is different, it is only when you actually try to choose the really suitable for you diving mask, here are some general tips to find suitable for diving mask.

Before diving shop. As far as possible with all your personal diving equipment. If you usually tied a ponytail, scuba diving also don't forget to try. If you usually when diving with caps and gloves, bring them also. The most important thing is your regulator, regulator secondary head will change the shape of the face in the mouth. When try diving mask with it, too. Dry test Once you're ready to test a mask, put regulator in his mouth, eyes looked up, put the mask in the right position, confirm to remove mask lace-up or turn to outside surface mirror, diving mask any location must be and facial contact; Pay particular attention to check the temples, or between the nose and mouth. If you are with a hood, please check with the head piece not seal condition. Nasal absorption test The regulator in your mouth, take off your mask lace-up, put a diving mask to the face. Gently breath (not to) absorption, diving mask should stick to the face. Please pay attention to the hair and beard will affect test condition. Nasal pinch test If you are with when the diving gloves, wear it. Put on a diving mask and regulator in your mouth, mask should be easy to let your hand over the regulator above and hold your nose, also want to make sure that the nose's underside parts not too tight. A breathing tube test Be sure to put the breathing tube and diving mask with firmly together. Some tape may be too wide or too narrow, the buckles in a figure 8 can solve this problem, in addition, the mask with must be easy to adjust, and I can't pressure on your ears. Diving mask features of diving mask has many characteristics, but most divers are the characteristics of the need to pay attention to compare. Low volume. A low volume of diving mask easy to clean and help ear pressure balance. The diving mask resistance is smaller, a low volume of diving mask size is about 4.5 inches or less than the distance between the two temples. Peripheral vision: through your diving mask edge to watch the scenery is very important. When put on a diving mask, test whether can see next to the scene.

Vision: down your regulator and buoyancy vest will usually limit your point of view of looking down. Sometimes you need to look down your diving watches group, buoyancy vest pocket, things like that. Square shape of diving mask usually has a better vision down.

Upward vision: a good upward vision will help you see clear when diving in front.

Vision corrective lenses: choose two box or four boxes of diving mask to install corrective lenses. Most of the lens company can provide 1 ° C or 1/2 ° C precision standard corrective lenses. Mist: lenses mist is a very simple thing, is as follows: clean the lens: dirty lenses is the main problem of fog. You can wipe with a soft cloth or toothpaste.

Follow manufacturer's directions mist: between two diving, diving mask for soaking in the water, keep it has been wet can help the lens won't fog in next time when diving. Leave a little water in the diving mask. When diving mask started to fog, as long as gently tilt one head fog to rinse with water.

(editor's suggestion: the most convenient way is your own saliva, don't skimp saliva, with as much as possible on the lens. Does not defeat to any special prevent mist liquid) suitable for with no primary standard is to choose the diving mask, the following is a selection of phreatic surface mirror of quick test guide in a minute

1. The mask with turn to dive in the front of the mirror

2. Will dive mask on the face

3. Determine the eyes and nose around wearing comfort

4. Replace the mask size to find the most suitable

5. Place the diving mask on face appropriate location, a light absorption with his nose

6. If the mask fits well, inhale should lead to diving mask formed in the cavity of vacuum, remove the hand when diving mask will be close to on the face.

7. If diving mask would still drop down, choose again once, repeat the above process of 1-6. Tip 1. Don't choose a suitable mask 2. If you find several mask is fit for you, before buying compare their characteristics.